What is a CV Boot?

To know the concept of the CV boot, you will first have to understand the CV or Constant Velocity joint.

The CV joints are connected to each end of the drive shaft and their job is to maintain steady levels of torque in the wheels via ranging speeds and other external situations.

The CV joint is equipped with oil to keep the parts greasy. The CV boot surrounds the joint and guards it from being damaged. The boot can be rubber or made of other composite materials, and they are really the only thing for protecting the CV joints.

Can I replace my CV boot?

You can substitute your CV boot easily and will find it to be quite complicated or potentially very disordered. Once you have raised the vehicle on jack stands or the equivalent, you must make sure to remove the rims and tires. Keep a jack stand under the a-arm of the corresponding boot to hold it in place while the car is elevated. Once you have done so, you’ll need to remove the driveshaft so that you can access and remove the boot for replacement.

Though this procedure may assist you on how to replace a CV boot on a Nissan Quest, it is advised to consult a local technician before starting this job as it is quite an undertaking.

Method to Change the Headlight Assembly

Open the hood of the vehicle and place it on the support rod while changing the bulbs. Push the retaining clip and pull out the electrical connection from the bulb socket. Hold the bulb socket and turn it anti-clockwise until it is releases from headlight assembly. Pull out the bulb from the headlight assembly. Fix the new bulb into the headlight assembly and turn it clockwise until it is affixed in place. Push the electrical connection into place until it clicks. If required, repeat the same procedure for replacing the headlight that is opposite to the repaired one. Lock the hood of vehicle and check the headlights to ensure that they are properly functioning.

The above explained Nissan Quest headlight assembly removal procedure is very easy to be executed.

Belt Removal Procedure

Remove the negative battery cable from the vehicle battery; here you can find an alternator on the front left of the engine block. Loosen the alternator pivot bolt with a box-end wrench by turning the bolt in anti-clockwise fashion. Don’t disconnect the pivot bolt. Move forward the alternator assembly with hand in the direction of center of the engine block. This will make slack in the serpentine belt. Drag the serpentine belt away from the engine block and off the crankshaft pulley, fan pulley, and alternator pulley.

Belt Installation Procedure

Install the new serpentine belt clockwise around the crankshaft pulley, alternator pulley, and fan pulley. Ensure that the serpentine belt is seated perfectly in every pulley assembly. Drag the alternator assembly away from the center of the engine block.

This creates tension in the serpentine belt. Keep the alternator in place by stressing on the serpentine belt. Tighten the alternator pivot bolt with a box-end wrench by turning the bolt clockwise until the alternator is safe. Plug the negative battery cable to the vehicle battery.

http://www.ehow.co.uk/how_6674585_replace-fan-belt-nissan-truck.html#ixzz179MWWJev

2008-2009 Nissan Quest Recall

Around 179383 units of 2008-2009 Nissan Quest vehicles were recalled on 26th February, 2010. These vehicles are recalled due to problems in the brake pedal. While manufacturing the brake pedal assembly, the pivot pin end was not spin formed to meet the specifications. There are chances that the pivot pin can slide and lead to partial disengagement of the brake pedal from its bracket. The driver may experience loose pedals due to this, thus increasing the crash risks. Dealers will inspect the vehicle for any such related problems and make the necessary replacements free of cost.

2007 Nissan Quest Recall

In this recall, around 1438 vehicles were affected due to problem in the front suspension. Few of the 2007 models of Nissan Quest underwent offline inspection during production in which a bolt was detached in the front suspension assembly; later it was not fastened as per the specifications. Such loose bolts may lead to vibrations and finally they may come off fully leading to intricacies in controlling the direction, which may lead to crash. Dealers will handle the problems and tighten the bolts as per requirements.

These were some handy details about Nissan Quest recalls in past; stay tuned for latest updates!

Procedure to Change Spark Plug in Nissan Quest

Follow these steps for replacement:

• Open the hood of the vehicle and find out the location of spark plug wires; this is usually near the exhaust manifolds. Take hold of the closest plug to you at the base; twist it and lug it out till it is free.
• Detach the plug by using a 3/8 inches ratchet, plug socket and extension; dispose the old plug.
• Make use of a gapping tool to gap the new plug as per the recommendations of the manufacturer and install it over the cylinder head using the same ratchet, plug socket and extension.
• Position the plug socket back into the spark plug till a popping sound is heard; this indicates that the boot of the plug is in place.
• Follow the above steps for replacing the other spark plugs too.

Now that you know how to change plugs in Nissan Quest, you don’t have to look out for a mechanic every time you need to change one.